Table of Contents

1 Numerical Analysis of Stress Strain Fluctuations in Coiled Tubing During Deepwater Deployment.- 2 Determining SIFs Using DIC Considering Crack Closure and Blunting.- 3 Characterization of Sub-surface Damage During the Early Stage of Stress Corrosion Cracking by Nano-indentation.- 4 In-situ Tensile Test On 316H SENT Using Digital Image Correlation.- 5 Development of Glass Steel Bibeam Specimen for Study of Brittle Crack Path Stability.- 6 Construction Procedure of Spot Weld Failure Model for Crash Simulation.- 7 Characterization and Modeling of Polymeric Foam Under Multi-Axial Static and Dynamic Loading.- 8 Cyclic Loading Experiment for Characterizing Foam Viscoelastic Behavior.- 9 Compression Testing of Aged Low Density Flexible Polyurethane Foam.- 10 A Micromechanical Characterization of Critical State.- 11 Studying the Influence of the Reclaimed Asphalt Pavement RAP on Local Deformation Properties of Asphalt Mixtures.- 12 Measurement of Structural Stresses by Hole Drilling and DIC.- 13 Assessment of Wood Properties Under Compression and Drying at the Ring Scale with the Grid Method.- 14 Compression Testing of Silica Microspheres with Synchronized SEM Video.- 15 Viscoelastic Relaxation of HEMA DMAEMA Responsive Hydrogels.- 16 A Simulator to Optimize the Experimental Set-up for Elasto-plastic Material Characterization.- 17 Constitutive Response of AA7075 T6 Aluminum Alloy Sheet in Tensile and Shear Loading.- 18 Constitutive Model Calibration via Autonomous Multiaxial Experimentation.- 19 New Methodology for Steady-State Friction Measurements of Granular Materials Under Pressure.- 20 Effect of Specimen Holder on Static and Fatigue Tests on Titanium/Cement Interfaces.- 21 Mechanical Behavior and Aluminization of Cu21Zn6Al Alloys.

About the Author

Dr. Yong Zhu – North Carolina State University, USA; Alan Zehnder –Cornell University, USA