Table of Contents

Preface. Introduction.

BINARY AND TERNARY CERAMICS.

Synthesis and Phase Development in the Cr-AI-N System (M-L. Antti, Y-B. Cheng, and M. Odén).

Phase Evolution and Properties of Ti2AIN Based Materials, Obtained by SHS Method (L. Chlubny, J. Lis, and M.M. Bucko).

Synthesis of Ti3SiC2 by Reaction of TiC and Si Powders (Ida Kero, Marta-Lena Antti, and Magnus Odén).

Toughening of a ZrC Particle-Reinforced Ti3AIC2 Composite (G.M. Song, Q.Xu, W.G. Sloof, S.B. Li, and S. van der Zwaag).

Microstructure and Properties of the Cermets Based on Ti(C,N) (S.Q. Zhou, W. Zhao, W.H. Xiong).

Scratch-Induced Deformation and Residual Stress in a Zirconium Diboride-Silicon Carbide Composite (Dipankar Ghosh, Ghatu Subhash, and Nina Orlovskaya).

Finite Element Modeling of Internal Stress Factors for ZrB2-Sic Ceramics (Michael P. Teague, Gregory E. Hilmas, and William G. Fahrenholtz).

Effects of Microstructural Anisotropy on Fracture Behavior of Heat-Pressed Glass-Ceramics and Glass-Infiltrated Alumina Composites for Dental Restorations (Humberto N. Yoshimura, Carla C. Gonzaga, Paulo F. Cesar, and Walter G. Miranda, Jr.)

SILICON CARBIDE, CARBON AND OXIDE BASED COMPOSITES.

Mechanical Properties of Hi-NICALON S and SA3 Fiber Reinforced SiC/SiC Minicomposites (C. Sauder, A. Brusson, and J. Lamon).

The Effect of Holes on the Residual Strength of SiC/SiC Ceramic Composites (G. Ojard, Y. Gowayed, U. Santhosh, J. Ahmad, R. Miller, and R. John).

Through Thickness Modulus (E33) of Ceramic Matrix Composites: Mechanical Test Method Confirmation (G. Ojard, T. Barnett, A. Calomino, Y. Gowayed, U. Santhosh, J. Ahmaad, R. Miller. and R. John).

The Effects of Si Content and Sic Polytype on the Microstructure and Properties of RBSC (A.L. Marshall, P. Chhillar, P. Karandikar, A. McCorrnick, and M.K. Aghajanian).

In-Situ Reaction Sintering of Porous Mullite-Bonded Silicon Carbide, Its Mechanical Behavior and High Temperature Applications (Neelkanth Bardhan and Parag Bhargava).

Study on Elasto-Plastic Behavior of Different Carbon Types in Carbon/Carbon Composites (Soydan Ozcan, Jale Tezcan, Jane Y. Howe, and Peter Filip).

Effects of Temperature and Steam Environment on Creep Behavior of an Oxide-Oxide Ceramic Composite (J.C. Braun and M.B. Ruggles-Wrenn).

Characterization of Foreign Object Damage in an Oxide/Oxide Composite at Ambient Temperature (Sung R. Choi and Donald J. Alexander).

Processing and Properties of Fiber Reinforced Barium Aluminosilicate Composites for High Temperature Radomes (Richard Cass, Geoffrey Eadon, and Paul Wentzel).

Author Index.

About the Author

Jonathan Salem is a Materials Research Engineer at NASA Glenn Research Center in Cleveland, OH. He received a PhD in Mechanical engineering from the University of Washington and has authored or co-authored over 60 archival publications, over 70 proceedings publications, and four national and international standards on mechanics of ceramics. He is a fellow of American Society for Testing and Materials and received a NASA Manned Spaced Flight Awareness Award for work on ceramic bearings for the Space Shuttle Main Engine Turbo-pump. In 2004, he received the Richard M. Fulrath Award from the American Ceramic Society for development of technical standards for design of structural ceramics.